Merge 1c636096e5 into ad49977f1b

bindings/odin/clay-odin/clay.odin

@@ -367,6 +367,8 @@ Context :: struct {} // opaque structure, only use as a pointer
 
 @(link_prefix = "Clay_", default_calling_convention = "c")
 foreign Clay {
+	_OpenElement :: proc() ---
+	_CloseElement :: proc() ---
 	MinMemorySize :: proc() -> u32 ---
 	CreateArenaWithCapacityAndMemory :: proc(capacity: c.size_t, offset: [^]u8) -> Arena ---
 	SetPointerState :: proc(position: Vector2, pointerDown: bool) ---
@@ -399,9 +401,7 @@ foreign Clay {
 
 @(link_prefix = "Clay_", default_calling_convention = "c", private)
 foreign Clay {
-	_OpenElement :: proc() ---
 	_ConfigureOpenElement :: proc(config: ElementDeclaration) ---
-	_CloseElement :: proc() ---
 	_HashString :: proc(key: String, offset: u32, seed: u32) -> ElementId ---
 	_OpenTextElement :: proc(text: String, textConfig: ^TextElementConfig) ---
 	_StoreTextElementConfig :: proc(config: TextElementConfig) -> ^TextElementConfig ---

clay.h

@@ -1156,6 +1156,7 @@ CLAY__ARRAY_DEFINE(Clay__MeasuredWord, Clay__MeasuredWordArray)
 typedef struct {
     Clay_Dimensions unwrappedDimensions;
     int32_t measuredWordsStartIndex;
+    float minWidth;
     bool containsNewlines;
     // Hash map data
     uint32_t id;
@@ -1504,6 +1505,7 @@ Clay__MeasureTextCacheItem *Clay__MeasureTextCached(Clay_String *text, Clay_Text
         if (current == ' ' || current == '\n') {
             int32_t length = end - start;
             Clay_Dimensions dimensions = Clay__MeasureText(CLAY__INIT(Clay_StringSlice) { .length = length, .chars = &text->chars[start], .baseChars = text->chars }, config, context->measureTextUserData);
+            measured->minWidth = CLAY__MAX(dimensions.width, measured->minWidth);
             measuredHeight = CLAY__MAX(measuredHeight, dimensions.height);
             if (current == ' ') {
                 dimensions.width += spaceWidth;
@@ -1529,6 +1531,7 @@ Clay__MeasureTextCacheItem *Clay__MeasureTextCached(Clay_String *text, Clay_Text
         Clay__AddMeasuredWord(CLAY__INIT(Clay__MeasuredWord) { .startOffset = start, .length = end - start, .width = dimensions.width, .next = -1 }, previousWord);
         lineWidth += dimensions.width;
         measuredHeight = CLAY__MAX(measuredHeight, dimensions.height);
+        measured->minWidth = CLAY__MAX(dimensions.width, measured->minWidth);
     }
     measuredWidth = CLAY__MAX(lineWidth, measuredWidth);
 
@@ -1663,21 +1666,25 @@ void Clay__CloseElement(void) {
         }
     }
 
+    float leftRightPadding = (float)(layoutConfig->padding.left + layoutConfig->padding.right);
+    float topBottomPadding = (float)(layoutConfig->padding.top + layoutConfig->padding.bottom);
+
     // Attach children to the current open element
     openLayoutElement->childrenOrTextContent.children.elements = &context->layoutElementChildren.internalArray[context->layoutElementChildren.length];
     if (layoutConfig->layoutDirection == CLAY_LEFT_TO_RIGHT) {
-        openLayoutElement->dimensions.width = (float)(layoutConfig->padding.left + layoutConfig->padding.right);
+        openLayoutElement->dimensions.width = leftRightPadding;
+        openLayoutElement->minDimensions.width = leftRightPadding;
         for (int32_t i = 0; i < openLayoutElement->childrenOrTextContent.children.length; i++) {
             int32_t childIndex = Clay__int32_tArray_GetValue(&context->layoutElementChildrenBuffer, (int)context->layoutElementChildrenBuffer.length - openLayoutElement->childrenOrTextContent.children.length + i);
             Clay_LayoutElement *child = Clay_LayoutElementArray_Get(&context->layoutElements, childIndex);
             openLayoutElement->dimensions.width += child->dimensions.width;
-            openLayoutElement->dimensions.height = CLAY__MAX(openLayoutElement->dimensions.height, child->dimensions.height + layoutConfig->padding.top + layoutConfig->padding.bottom);
+            openLayoutElement->dimensions.height = CLAY__MAX(openLayoutElement->dimensions.height, child->dimensions.height + topBottomPadding);
             // Minimum size of child elements doesn't matter to scroll containers as they can shrink and hide their contents
             if (!elementHasScrollHorizontal) {
                 openLayoutElement->minDimensions.width += child->minDimensions.width;
             }
             if (!elementHasScrollVertical) {
-                openLayoutElement->minDimensions.height = CLAY__MAX(openLayoutElement->minDimensions.height, child->minDimensions.height + layoutConfig->padding.top + layoutConfig->padding.bottom);
+                openLayoutElement->minDimensions.height = CLAY__MAX(openLayoutElement->minDimensions.height, child->minDimensions.height + topBottomPadding);
             }
             Clay__int32_tArray_Add(&context->layoutElementChildren, childIndex);
         }
@@ -1686,18 +1693,19 @@ void Clay__CloseElement(void) {
         openLayoutElement->minDimensions.width += childGap;
     }
     else if (layoutConfig->layoutDirection == CLAY_TOP_TO_BOTTOM) {
-        openLayoutElement->dimensions.height = (float)(layoutConfig->padding.top + layoutConfig->padding.bottom);
+        openLayoutElement->dimensions.height = topBottomPadding;
+        openLayoutElement->minDimensions.height = topBottomPadding;
         for (int32_t i = 0; i < openLayoutElement->childrenOrTextContent.children.length; i++) {
             int32_t childIndex = Clay__int32_tArray_GetValue(&context->layoutElementChildrenBuffer, (int)context->layoutElementChildrenBuffer.length - openLayoutElement->childrenOrTextContent.children.length + i);
             Clay_LayoutElement *child = Clay_LayoutElementArray_Get(&context->layoutElements, childIndex);
             openLayoutElement->dimensions.height += child->dimensions.height;
-            openLayoutElement->dimensions.width = CLAY__MAX(openLayoutElement->dimensions.width, child->dimensions.width + layoutConfig->padding.left + layoutConfig->padding.right);
+            openLayoutElement->dimensions.width = CLAY__MAX(openLayoutElement->dimensions.width, child->dimensions.width + leftRightPadding);
             // Minimum size of child elements doesn't matter to scroll containers as they can shrink and hide their contents
             if (!elementHasScrollVertical) {
                 openLayoutElement->minDimensions.height += child->minDimensions.height;
             }
             if (!elementHasScrollHorizontal) {
-                openLayoutElement->minDimensions.width = CLAY__MAX(openLayoutElement->minDimensions.width, child->minDimensions.width + layoutConfig->padding.left + layoutConfig->padding.right);
+                openLayoutElement->minDimensions.width = CLAY__MAX(openLayoutElement->minDimensions.width, child->minDimensions.width + leftRightPadding);
             }
             Clay__int32_tArray_Add(&context->layoutElementChildren, childIndex);
         }
@@ -1849,7 +1857,7 @@ void Clay__OpenTextElement(Clay_String text, Clay_TextElementConfig *textConfig)
     Clay__StringArray_Add(&context->layoutElementIdStrings, elementId.stringId);
     Clay_Dimensions textDimensions = { .width = textMeasured->unwrappedDimensions.width, .height = textConfig->lineHeight > 0 ? (float)textConfig->lineHeight : textMeasured->unwrappedDimensions.height };
     textElement->dimensions = textDimensions;
-    textElement->minDimensions = CLAY__INIT(Clay_Dimensions) { .width = textMeasured->unwrappedDimensions.height, .height = textDimensions.height }; // TODO not sure this is the best way to decide min width for text
+    textElement->minDimensions = CLAY__INIT(Clay_Dimensions) { .width = textMeasured->minWidth, .height = textDimensions.height };
     textElement->childrenOrTextContent.textElementData = Clay__TextElementDataArray_Add(&context->textElementData, CLAY__INIT(Clay__TextElementData) { .text = text, .preferredDimensions = textMeasured->unwrappedDimensions, .elementIndex = context->layoutElements.length - 1 });
     textElement->elementConfigs = CLAY__INIT(Clay__ElementConfigArraySlice) {
             .length = 1,
@@ -2237,25 +2245,25 @@ void Clay__SizeContainersAlongAxis(bool xAxis) {
                 for (int32_t childOffset = 0; childOffset < resizableContainerBuffer.length; childOffset++) {
                     Clay_LayoutElement *childElement = Clay_LayoutElementArray_Get(&context->layoutElements, Clay__int32_tArray_GetValue(&resizableContainerBuffer, childOffset));
                     Clay_SizingAxis childSizing = xAxis ? childElement->layoutConfig->sizing.width : childElement->layoutConfig->sizing.height;
+                    float minSize = xAxis ? childElement->minDimensions.width : childElement->minDimensions.height;
                     float *childSize = xAxis ? &childElement->dimensions.width : &childElement->dimensions.height;
 
                     if (!xAxis && Clay__ElementHasConfig(childElement, CLAY__ELEMENT_CONFIG_TYPE_IMAGE)) {
                         continue; // Currently we don't support resizing aspect ratio images on the Y axis because it would break the ratio
                     }
 
-                    // If we're laying out the children of a scroll panel, grow containers expand to the height of the inner content, not the outer container
                     float maxSize = parentSize - parentPadding;
+                    // If we're laying out the children of a scroll panel, grow containers expand to the size of the inner content, not the outer container
                     if (Clay__ElementHasConfig(parent, CLAY__ELEMENT_CONFIG_TYPE_SCROLL)) {
                         Clay_ScrollElementConfig *scrollElementConfig = Clay__FindElementConfigWithType(parent, CLAY__ELEMENT_CONFIG_TYPE_SCROLL).scrollElementConfig;
                         if (((xAxis && scrollElementConfig->horizontal) || (!xAxis && scrollElementConfig->vertical))) {
                             maxSize = CLAY__MAX(maxSize, innerContentSize);
                         }
                     }
-                    if (childSizing.type == CLAY__SIZING_TYPE_FIT) {
-                        *childSize = CLAY__MAX(childSizing.size.minMax.min, CLAY__MIN(*childSize, maxSize));
-                    } else if (childSizing.type == CLAY__SIZING_TYPE_GROW) {
+                    if (childSizing.type == CLAY__SIZING_TYPE_GROW) {
                         *childSize = CLAY__MIN(maxSize, childSizing.size.minMax.max);
                     }
+                    *childSize = CLAY__MAX(minSize, CLAY__MIN(*childSize, maxSize));
                 }
             }
         }

renderers/SDL3/clay_renderer_SDL3.c

@@ -148,7 +148,7 @@ static void SDL_Clay_RenderClayCommands(Clay_SDL3RendererData *rendererData, Cla
     for (size_t i = 0; i < rcommands->length; i++) {
         Clay_RenderCommand *rcmd = Clay_RenderCommandArray_Get(rcommands, i);
         const Clay_BoundingBox bounding_box = rcmd->boundingBox;
-        const SDL_FRect rect = { (int)bounding_box.x, (int)bounding_box.y, (int)bounding_box.width, (int)bounding_box.height };
+        const SDL_FRect rect = { (float)bounding_box.x, (float)bounding_box.y, (float)bounding_box.width, (float)bounding_box.height };
 
         switch (rcmd->commandType) {
             case CLAY_RENDER_COMMAND_TYPE_RECTANGLE: {
@@ -184,27 +184,27 @@ static void SDL_Clay_RenderClayCommands(Clay_SDL3RendererData *rendererData, Cla
                 if (config->width.left > 0) {
                     const float starting_y = rect.y + clampedRadii.topLeft;
                     const float length = rect.h - clampedRadii.topLeft - clampedRadii.bottomLeft;
-                    SDL_FRect line = { rect.x, starting_y, config->width.left, length };
+                    SDL_FRect line = { rect.x, starting_y, (float)config->width.left, length };
                     SDL_RenderFillRect(rendererData->renderer, &line);
                 }
                 if (config->width.right > 0) {
                     const float starting_x = rect.x + rect.w - (float)config->width.right;
                     const float starting_y = rect.y + clampedRadii.topRight;
                     const float length = rect.h - clampedRadii.topRight - clampedRadii.bottomRight;
-                    SDL_FRect line = { starting_x, starting_y, config->width.right, length };
+                    SDL_FRect line = { starting_x, starting_y, (float)config->width.right, length };
                     SDL_RenderFillRect(rendererData->renderer, &line);
                 }
                 if (config->width.top > 0) {
                     const float starting_x = rect.x + clampedRadii.topLeft;
                     const float length = rect.w - clampedRadii.topLeft - clampedRadii.topRight;
-                    SDL_FRect line = { starting_x, rect.y, length, config->width.top };
+                    SDL_FRect line = { starting_x, rect.y, length, (float)config->width.top };
                     SDL_RenderFillRect(rendererData->renderer, &line);
                 }
                 if (config->width.bottom > 0) {
                     const float starting_x = rect.x + clampedRadii.bottomLeft;
                     const float starting_y = rect.y + rect.h - (float)config->width.bottom;
                     const float length = rect.w - clampedRadii.bottomLeft - clampedRadii.bottomRight;
-                    SDL_FRect line = { starting_x, starting_y, length, config->width.bottom };
+                    SDL_FRect line = { starting_x, starting_y, length, (float)config->width.bottom };
                     SDL_SetRenderDrawColor(rendererData->renderer, config->color.r, config->color.g, config->color.b, config->color.a);
                     SDL_RenderFillRect(rendererData->renderer, &line);
                 }
@@ -238,10 +238,10 @@ static void SDL_Clay_RenderClayCommands(Clay_SDL3RendererData *rendererData, Cla
             case CLAY_RENDER_COMMAND_TYPE_SCISSOR_START: {
                 Clay_BoundingBox boundingBox = rcmd->boundingBox;
                 currentClippingRectangle = (SDL_Rect) {
-                        .x = boundingBox.x,
-                        .y = boundingBox.y,
-                        .w = boundingBox.width,
-                        .h = boundingBox.height,
+                        .x = (int)boundingBox.x,
+                        .y = (int)boundingBox.y,
+                        .w = (int)boundingBox.width,
+                        .h = (int)boundingBox.height,
                 };
                 SDL_SetRenderClipRect(rendererData->renderer, &currentClippingRectangle);
                 break;